Mobile Mark, Inc. is a leading supplier of antennas to wireless companies throughout the world. Mobile Mark offers innovative designs, quality manufacturing, and reliable performance. Many of our products feature innovative, patented designs, available only from Mobile Mark. The company was established in 1984, and operates factories near Chicago, IL and Birmingham, England. Mobile-Mark offers an extensive line of mobile, portable, and fixed site antennas. They also offer custom design products for specialized OEM applications.
 

The CVX Series is enclosed in a stylish case of 2"W x 3.25"L x 3/4"H. The case is water resistant, but should be protected from moisture and the elements as much as possible. It uses double sided mounting tape, for securing to a surface. Center-fed flexible radiators provide excellent performance.

The antennas are ground plane independent and can be mounted in a variety of locations; both inside and outside a vehicle. They can be installed behind a rearview mirror, under a dashboard or rear window deck/shelf.

For external applications, appropriate locations might include under rubber bumper strips, or inside side mirrors. The antennas are fully waterproof. The CVX series is normally supplied with 15ft of RG-174 with a SMA male connector. Other connectors and configurations are available; please consult with an AIRDESK Account Executive for more information.

The PSKN Series antennas use a full length center fed dipole configuration. A knuckle feature allows the antenna to be adjusted between a straight position, to a 90o right angle position. This is useful for products that may need to be placed both horizontal and vertical, or where the connector is placed on the side of a radio device. Maximum radiation is achieved along the horizon, and bandwidth provided is substantial. VSWR is typically 2:1 or better over the desired frequency range. The stocked antenna is 1900MHz with an SMA Male end. Other configurations are available in many popular frequency bands. The radome is made of flexible Polyurethane. Please consult with an AIRDESK Account Executive for more information.

All models are outfitted with separate cabling for the cellular and GPS bands. The cable supplied is 15 ft of RG-58 for the cellular feed with a SMA male end, and 15ft of RG-174 for GPS with an SMA male. Other connectors and configurations are available; please consult with an AIRDESK Account Executive for more information.

GPS performance is 26 dB, with 5 dBi antenna gain. The GPS circuit has a low noise figure (2.0 dB max) with excellent filter characteristics. Power for the GPS amplifier signal is applied through the same cabling directly to the GPS circuit. The GPS amplifier is available in either 5 VDC or 3.3 VDC bias.

All models are outfitted with separate cabling for the cellular and GPS bands. The cable supplied is 10 ft of dual bonded RG-174 for the cellular feed with a TNC male end, and 10ft of dual bonded RG-174 for GPS with an SMA male. Other connectors and configurations are available; please consult with an AIRDESK Account Executive for more information.

The antenna uses a patented current-fed design which results in stable performance over the life of the antenna. The antenna provides efficient through-glass coupling and excellent impedance matching. The in-car counterpoise improves the vehicle's ground plane and adds to the overall antenna performance.

The Mini-Mark is designed for easy installation. The mounting plates are constructed of low-profile ABS plastic. This thin profile allows them to flex, accommodating the curvature of any vehicle window. The antennas mount to the window with reliable 3M VHB double sided tape. The round mounting plates allow the inside and outside to be easily aligned. A side cable entrance on the inner transfer box allows easy routing up to the headliner.

Both dual-band models are outfitted with 15 ft. of RG-58 with a SMA male end. Other connectors and configurations are available; please consult with an AIRDESK Account Executive for more information.

Two dual-band combinations are offered, 800/1900MHz and 900/1800MHz. The antennas are available with an SMA Male connector. The connector is lightly knurled for easy tightening.

The antenna radomes are made from polyurethane, which provided a protective, waterproof covering. It is a solid material, which provides some flexibility. This makes these antennas suitable for devices such as access points, or hand-held portable units.

The surface mount style antennas can be mounted to any metal structure, vehicle, cargo container, trailer or ceiling. The design uses a 5/8" feed thru for securing to the vehicle. Access to the underside of the body surface is required to complete the installation.

The dual-band operation is provided by low profile, yet high efficiency air dielectric radiating element. This maintains effective radiation across the desired frequency range, with omni-directional coverage. Unity gain performance is maintained.

The antennas are enclosed in a weatherproof polycarbonate radome, and supplied with all mounting hardware and sealing gasket. The dual band series has a height of 0.95”. The standard color is white but can also be provided in black or grey polycarbonate.

The antennas are outfitted with 15 feet of cable and a SMA male connector as stock. Other connectors and configurations are available; please consult with an AIRDESK Account Executive for more information.

The surface mount style antennas can be mounted to any vehicle, cargo container or trailer. Separate cabling is provided for the GPS and Cellular interfaces. The design uses a 5/8" feed thru for securing to the vehicle. Access to the underside of the body surface is required to complete the installation.

GPS performance is 26 dB, with 5 dBi antenna gain. The GPS circuit has a low noise figure (2.0 dB max) with excellent filter characteristics. Power for the GPS amplifier (+3.3 VDC or +5 VDC) and signal is applied through the same cabling directly to the GPS circuit.

The antennas are enclosed in a 4 1/2"D x 3/4"H weatherproof polycarbonate radome, and supplied with all mounting hardware and sealing gasket. The standard color is white, but can also be supplied in black or grey.

The antennas are outfitted with 15 feet of RG-174 cable & SMA male connectors for the GPS Interface and 15 feet of RG-58 with SMA male connectors as stock. Other connectors and configurations are available; please consult with an AIRDESK Account Executive for more information.